Home > Products > HPI > 6012 Data Sheet

Specifications
Bottom of page

LOCAL DISPLAY & CONTROLLER, MODEL 6012

 

The 6012 Local Digital Display is designed to be used with other series 6000 components. This display can be used as a local or a remote display. It can also be used as a slave display to another remote display.
The 6012 has built in local audible and visual alarms in addition to the 2 line LCD. A contact closure is also provided for use with external alarms.

Specifications

Mechanical
Size: 7.7”W x 8”H x 3”D (includes mounting bracket)
Weight: 3 Lbs (including power supply and bracket)
Construction: Metal clam shell. Lower panel removes for access to controls and connectors.

Electrical
Power: 12 Volt external power supply module operates on 110 VAC, 60 Hz
On/Off Switch: Not provided, intended to always remain on. Turn off by disconnecting power module.
Power available for detector: 12 Volts
Signal From Detector: Accepts pulses from detector.
Outputs: RS232 or RS485 Output available
Inputs: Accepts counts or RS232

Operational
Display: 2 lines, 16 character LCD
Lights: Red, yellow and green alarm lights
Alarms: Piezo Beeper, may be silenced once turned on.
Alarm Settings: Several depending on application
Watchdog Timer

Environmental
Temperature range: -10 to 50 C
Humidity: 5 to 99% Non Condensing

Options / Equipment
Many options are available including additional RS232, displays, and alarms
Supplied with mounting bracket and power supply

   
Top of Page
Specifications subject to change without notice.
Far West Technology, Inc. © 2003 Fax: +1.805.964.3162 Tel: +1.805.964.3615 Email: info@fwt.com